Preventive Maintenance Schedule - AGFA Drystar 5500 User Manual

Preventive maintenance schedule

Maintenance and cleaning involve only some minor user tasks. Refer to the
following pages for the appropriate cleaning procedure.
Ad hoc
When image quality tends to
degrade. An appropriate warning
message is displayed.
When image quality tends to
degrade. An appropriate warning
message is displayed
(refer to
Reference manual).
Safety guidelines
To prevent damage to the printer while performing maintenance, observe
the following safety precautions:
•
Do not lubricate the printer.
•
Do not attempt to disassemble the printer.
•
Do not touch the resistor line of the printhead.
•
Always switch off the Drystar 5500 and disconnect the power cord from the
outlet before carrying out any maintenance work.
" Film jam removal or cleaning the printer head can be done without
switching the power off.
2901B EN 20040413
Interval
the Drystar 5500
What to do?
'Cleaning the exterior'
'Cleaning the printhead resistor
line'
'Printhead profile calibration'
Advanced operation (key-operator mode)
Page
50
51
116
49