Set-Up Of Other Shock Models; Headset Options; Bottom Bracket (Bb) On Spark - Scott 2015 Spark Series Owner's Manual

SET-UP OF OTHER SHOCK MODELS

SCOTT strongly recommends using only the FOX Nude (FOX Float CTD /X-Fusion
E1) Shock with the Spark bike, as we designed both parts to be perfectly matched
with a linear suspension rate.
Also on those shock models the SAG should be 10mm.
For all basic steps on inflating the shock and adjusting the rebound please refer to
the description of the FOX Nude set-up.
Other Shock Models on Spark
If you want to use a different rear shock model than the one originally on the bike,
please make sure that the shock will not in any position hit the frame and cause a
damage to the frame.
Please follow the instruction below:
- Please make sure that the rear shock or its accessory parts do not touch the frame
when mounting or suspending.
- For doing so release the air/remove the coil, install the shock and compress the
shock completely.
- If the shock touches the frame while doing so, do not use this shock in order to
avoid damage to frame, swingarm or shock.

HEADSET OPTIONS

Spark features different versions of headset
systems.
A tapered headset and fork steerer system
to match with semi-integrated headsets of
the "50-61"mm range with ID of Headtube
of 44.0mm on top and 54.9mm on the
lower end.
18
SPARK | BIKE OWNER'S MANUAL 2015
Ritchey WCS Carbon Zero Tapered PF 50-61mm
Ritchey PRO Tapered PF 50-61mm
It is also possible to use forks with a standard 1 1/8" steerer tube when using a
reducer headset, for example:
Ritchey WCS Carbon Zero Tapered PF 50-61mm
A straight 1 1/8" headset and fork steerer system to match with semi-integrated
headsets with an ID on the headtube of 44.0mm on top and lower end.
This is a standard part in the market and should be available from several parts
manufacturers.

BOTTOM BRACKET (BB) ON SPARK

All carbon front frames of Spark have a BB shell for
BB92PF standard.
This matches to several bearing and crankset
models of Shimano, SRAM, FSA and others.
The alloy front frames of Spark have a BB shell for
BB92PF or 73mm BSA standard, depending on
the model.
BIKE OWNER'S MANUAL 2015 |
18mm UD PRD 13636
12.9mm PRD 13640
18mm UD for 1 1/18" fork PRD 14860
SPARK
19