Settings; Highway/City Mode; Ultrabright Data Display Brightness - Cobra XRS 9345 Operating Instructions Manual

Settings

Your Detector
Settings
When changing the Settings on your detector, please keep in mind:
Buttons can have multiple functions.
I
All settings will be stored in memory when the power is
I
turned Off and recalled when the power is turned back On.

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear as you complete each step. The factory setting
is Highway mode.
Highway Mode
h
X K Ka V S
City Mode
c
X K Ka V S
To Change From Highway Mode to City Mode
Press and release
Tone Visual Display
the City button.
One beep c
appears in the display
To Change From City Mode Back to Highway Mode
Press and release
Tone Visual Display
the City button again.
h
Two beeps appears in the display
English
6
Your Detector

UltraBright Data Display Brightness

•
You can choose from three settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Bright
Press and
release Dim
Dark
button
Dim
Press and release
City Button
To Change the Brightness to Dim
Press and
release
Press and release
the Dim button
once.
To Change the Brightness to Dark
Press and release
the Dim button
again.
To Change the Brightness to Bright
Press and release
the Dim button a
third time.
Settings
Dim Button
Tone Visual Display
One beep Display dims
Tone Visual Display
One beep Display remains dim
(no visual alerts will be seen)
Tone Visual Display
Two beeps Display returns
to full brightness
Nothing Comes Close to a Cobra ® 7