Kia sorento 2015 Owner's Manual page 229

Adjusting the driver and passenger
side temperature individually
• Press the "SYNC" button again to
adjust the driver and passenger
side temperature individually. The
illumination of button turns off.
• Operate the driver side tempera-
ture control knob to adjust the driv-
er side temperature.
• Operate the passenger side tem-
perature control knob to adjust the
passenger side temperature.
Temperature conversion
You can switch the temperature
mode from Centigrade to Fahrenheit
as follows:
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The display will change
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.
Air intake control
■
Type A
■
Type B
This is used to select the outside
from
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.
Features of your vehicle
Outside (fresh) air position
■ Type B, D
OUMA044164
Recirculated air position
■ Type A, C
OUMA044165
With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.
With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.
4 145