Deleting A Raid Set - ECS Z97I-DRONE User Manual

Main Advanced
Hard Disk Drive Priorities
1st Boot

Deleting a RAID set

1. In the main Intel
Delete RAID Volume using the up/down arrow key then press <Enter>.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
2. Use the space bar to select the RAID set you want to delete.
Press the <Del> key to delete the set.
3. A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Intel(R) Matrix Storage Manager option ROM 11.0.0.1204
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
Name Level
Volume0
[ ]Select
Pressing <Y> deletes all the data in the HDDs.
Z97I-DRONE USER MANUAL
Chipset M.I.B. X
Intel volume0
®
Rapid Storage Technology RAID BIOS menu, highlight
[ Main Menu
[ CREATE VOLUME MENU
Drives Capacity
RAID0(Stripe) 2 931.5GB
[ DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete "Volume0"? (Y/N):
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
[ESC]-Previous Menu
Security Boot
Sets the system boot order
lk
: Select Screen
mn
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
F9: Capture Screen
ESC/Right Click: Exit
]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
]
Status Bootable
Normal Yes
]
[DEL]-Delete Volume
Exit
77