Siemens slider SL45 Operating Instructions Manual page 5

Hide thumbs Also See for slider SL45:
Table of Contents

Advertisement

instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Keep the iron and its cord out of reach of children less
than 8 years of age when it is energized or cooling down.
d,
y
• This appliance is to be connected
and used in accordance with
d
the information stated on its
characteristics plate.
• This appliance must be connected to
an earthed socket. If it is absolutely
necessary to use an extension cable,
make sure that it is suitable for 16A
and has a socket with an earth
connection.
• If the safety fuse fitted in the
appliance blows, the appliance will
be rendered inoperative. To restore
normal operation the appliance will
have to be taken to an authorised
Technical Service Centre.
• In order to avoid that, under
unfavourable mains conditions,
phenomena like transient voltage
drops or lighting fluctuations can
happen, it is recommended that the
iron is connected to a power supply
system with a maximum impedance
of 0.27Ω . If necessary, the user
can ask the public power supply
company for the system impedance
at the interface point.
• The appliance must never be placed
directly under the tap to fill the water
tank.
CAUTION. Hot surface.
Sur fa ce is liable to get hot during use.
• Unplug the appliance from the mains
supply after each use, or if a fault is
suspected.
• The electrical plug must not be
removed from the socket by pulling
the cable.
• Never immerse the iron in water or
any other fluid.
• Do not leave the appliance exposed
to weather conditions (rain, sun,
frost, etc.)
Important:
This appliance reaches high
temperatures and produces steam
during use, this could cause scalds or
burns if not used properly.
The steam hose, base station, metal
plate at the bottom of the removable
iron pad (2) and in particular the
iron can get hot when used. This is
normal.
Never aim the steam at people or
animals.
Do not allow the power cable to come
into contact with the soleplate when
it is hot.
Be aware that the system can keep
on steaming for a short additional
time after releasing the steam trigger.
This is a normal function.
5
S IEME NS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents