Gigabyte GA-Z97X-Gaming G1 User Manual page 71

C-2. Configuring Legacy RAID ROM
Enter the Intel legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the
®
installation of Windows operating system for a non-RAID configuration.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which says
"Press <Ctrl-I> to enter Configuration Utility" (Figure 9). Press <Ctrl> + <I> to enter the RAID Configuration Utility.
Intel(R) Rapid Storage Technology - Option ROM - 13.0.0.2075
Copyright (C) Intel Corporation. All Rights Reserved.
RAID Volumes :
None defined.
Physical Devices :
ID Device Model
1 Hitachi HDS72105
2 Hitachi HDS72105
to enter Configuration Utility...
Press <CTRL - I>
Step 2:
After you press <Ctrl> + <I>, the MAIN MENU screen will appear (Figure 10).
Create RAID Volume
If you want to create a RAID array, select Create RAID Volume in MAIN MENU and press <Enter>.
Intel(R) Rapid Storage Technology - Option ROM - 13.0.0.2075
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes :
None defined.
Physical Deivces :
ID Device Model
1 Hitachi HDS72105
2 Hitachi HDS72105
[hi]-Select
Serial #
JP1532FR3BWV7K
JP1532ER046M2K
Figure 9
Copyright (C) Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
Serial #
JP1532FR3BWV7K
JP1532ER046M2K
[ESC]-Exit
Figure 10
- 71 -
Size Type/Status(Vol ID)
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
4. Recovery Volume Options
5. Acceleration Options
6. Exit
Size Type/Status(Vol ID)
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
[ENTER]-Select Menu
Configuring SATA Hard Drive(s)