Toshiba Canvio AeroCast User Manual page 10

10
❖
Do not plug the AC adaptor into a power source
that does not correspond to the voltage, current
and the frequency specified on the regulatory
label of the unit. An overload on the socket and/
or AC adaptor may cause a fire or electric shock,
possibly resulting in serious injury.
❖
Always confirm that the power plug (and
extension cable plug if used) has been fully
inserted into the socket, to ensure a secure
electrical connection. Failure to do so may result
in a fire or electric shock, possibly resulting in
serious injury.
❖
Be careful if you use a multiple connector. An
overload on one socket could cause a fire or
electric shock, possibly resulting in serious injury.
❖
Always make sure the drive and AC adaptor have
adequate ventilation and are protected from
overheating when the AC adaptor is connected to
a power outlet. Inadequate ventilation may cause
the drive and AC adaptor to overheat resulting in
a fire or electric shock and serious injury.
❖
If dust gets on the power plug connectors or
connector base, turn the power off and
disconnect the power plug. Then clean the
connector and/or connector base with a dry soft
cloth. Failure to do so may cause a fire or electric
shock, possibly resulting in serious injury.
❖
Avoid extended contact between the drive and
your skin. The drive may become hot! Avoid
prolonged contact to prevent skin irritation and/or
heat injury.