Setting A New Starting Point - Subaru Navigation System Owner's Manual

ROUTE GUIDANCE
If a recommended route is already available, and a new
destination has been selected using the method described
in the previous section, the start new route, add a new
waypoint (midway point), and add the destination you
No. Function
Select to create a new route at the position you
selected. Previous destinations and waypoints are
deleted.
Select to add the position you selected as a new
waypoint for the current route. Other destinations for
the route are already enabled. Note: Waypoints are
set so that the optimum route is maintained between
destinations. You can use the route editing function to
set the position for waypoints on the route.
216
No. Function
destination for the current route. Other destinations for
the route are already enabled. Up to now, the position
waypoint.

SETTING A NEW STARTING POINT

In standard navigation, all routes are created from the
current position. You can turn off the GPS so that you
can study a route that is not currently being driven, run a
simulation, and check the time or distance for the route. This
way, you can set a start point for the route without using the
current GPS position.
1.
Display the "Change Route (Change Route)" screen.
2.
Select (Edit Route) /
Edit Route
(Create Route).
(Edit Route) is displayed only when
Edit Route
a route is set.
Create Route
displayed when a route is not set.
Create Route
(Create Route) is