FUNCTIONS
INPUT MODE
Press the (
) button on the main unit's top panel or the
select the mode you want.
Input mode
Optical Digital input
AUX input
HDMI input
BLUETOOTH mode
TV SoundConnect
USB mode
ARC (HDMI OUT)
ARC (Audio Return Channel) transmits the digital audio signal to the HDMI OUT (ARC) port.
1. Connect a TV supporting ARC to the Soundbar with an HDMI cable.
2. Turn on the TV, turn on the Soundbar, and then turn on the Soundbar's Anynet+ function.
3. Press the (
) button on the main unit's top panel or the
to select the D.IN mode.
If the HDMI cable does not support the ARC function, ARC will not work.
●
To turn off the ARC function, turn Anynet+ off.
●
The unit turns off automatically in the following
Display
situations.
D.IN
D.IN/HDMI/BT/TV/USB Mode
●
AUX
- If there is no audio signal for 25 minutes.
HDMI
AUX Mode
●
BT
- If the AUX cable is disconnected for 25 minutes.
TV
USB
- To turn the Auto Power Down function ON or
HDMI Cable
(Not supplied)
17
(SOURCE) button on the remote control to
In Auto Power Down ON mode,if there is no
KEY input for 8 hours when the AUX cable is
connected.
OFF, press and hold the p button for 5
seconds. OFF/ON-AUTO POWER DOWN
appears on the display.
(SOURCE) button on the remote control
FUNCTIONS