LG 47LV5500 Owner's Manual page 29

Installing the wall mounting bracket (For LZ9600 series)
1
Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
y y
on the surface to protect the screen from
damage. Make sure not objects press
against the screen.
2
Fasten the screws to mount the wall mounting
bracket for the TV and the TV protection
brackets to the TV.
Screw for assembly
(Upper hole)
M4 x 7
3
Mount the wall mounting bracket to the place
you want using the wall anchors and screws.
You can adjust the level of the wall mounting
bracket with the level gauge attached.
Wall Anchor
Screw for assembly
(Lower hole)
M4 x 14
Screw
ASSEMBLING AND PREPARING
3-1 Drill holes with depth of 80 mm - 100
mm at the anchor location with a 8 mm
drill bit.
3-2 Clean the drilled holes.
3-3 Insert the wall anchor provided in the
hole.
3-4 Push the wall mounting bracket to the
wall aligning with the hole.Make sure that
the angle adjusting knob is located on the
upper side of the wall mounting bracket.
3-5 Screw the Screw for the Wall Mounting
Bracket into the hole. At this time, fasten
the Screw applying a torque of at least 45
kgf•cm.
29