Precautions On Set Up - Panasonic FP-7742 Service Manual

1. 7 Precautions on Set Up

Copy machine performance and the copy quality is subject to and dependant
on environmental conditions. To maintain good performance, quality, and safe
operation, observe the following precautions:
1) Do not install the system under the following conditions to operate safely and
avoid trouble.
• High temperature, high humidity, low temperature or low humidity
• The temperature or humidity varies suddenly
• Being exposed to direct sunlight
• Dusty space
• Badly ventilated location
• Exposed to chemical gases (such as ammonia gas)
• Exposed to strong vibration
• Directly exposed to direct wind (ex. outlet of air conditioner)
2) The weight of machine is 220lb(100 kg) or more with options. It must be placed
on a firm platform which is level.
3) The maximum power consumption is 1.5 kW. Use an independent power supply
of 120 V and 15 A (220-240V and 7A)or higher. (Do not use a extension cord.)
4) Make sure the machine is properly grounded. (Do not ground to gas or water
pipe.)
• A ground terminal is provided on the back of the copier main body.
• Strip the end of a ground wire and connect with a ground terminal.
5) Install the machine with enough space around it.
14"/350mm
Exit tray
4"/100 mm
28"/700mm
Copier
Multi sheet bypass
1-11