NETGEAR FVS318N Setup Manual page 2

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 1. Default wireless settings (continued)
Item
Country
Operating frequency
Default security profile
Default network name (SSID)
Broadcast SSID
Security
Encryption
Authentication
Transmission rate
Default transmit power
802.11 wireless mode
802.11b/g/n radio frequency channel Auto
802.11n channel spacing
Beacon interval
DTIM interval
RTS threshold
Fragmentation threshold
Preamble mode
Protection mode
Power save
1. The maximum wireless signal rate derived from IEEE Standard 802.11 specifications. The actual throughput varies. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Description
The selection is limited to the countries in the region in which you
purchased the wireless VPN firewall. The default settings are:
• Africa. Algeria
• Asia. Azerbaijan
• Europe. Albania
• Middle East. Bahrain
• North America, Latin America, and The Caribbean. United States
• Oceania. Australia
Nonconfigurable: Set at 2.4 GHz
default1
FVS318N_1
Enabled
Open
None
None
1
Best
Full
802.11ng (this is the default for most countries)
20 MHz
100 ms
2
2346 bytes
2346 bytes
Long
None
Disabled
Basic Wireless Configuration and Security
2