Contents Important Safety Instructions ......... 2 SAFETY ..............2 WARNING ..............2 Identifying the Parts ..........4 Main Unit ..............4 Remote Control ............6 Connections............7 Connect to FM Antenna ..........7 Connect to TV ............. 7 Connect to an External Audio Device ......8 Connect power ............
IMPORTANT SAFETY INSTRUCTIONS 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to The lightning flash with arrowhead avoid injury from tip-over.
Page 4
The ventilation should not be impeded by covering the ventilation openings with items such Manufactured under license from Dolby as newspaper, table-cloths, curtains etc. Make Laboratories. Dolby and the double-D symbol are sure there is at least 20 cm of space above and trademarks of Dolby Laboratories.
Identifying the Parts Main Unit Back View Panel View 2 34 56 7...
Page 6
Back View Panel View HDMI Socket Connect to a TV. STANDBY AUDIO OUT Terminal Press this button to turn on this product or switch to the Eco Power standby mode. Connect to a TV. Disc Compartment VIDEO Terminal Connect to a TV. COMPONENT Socket Connect to a USB flash drive.
Remote Control Stop play (Press and hold )Erase a preset radio station. SETUP Access or exist system setup menu. SLOW / Navigate up through menus. Tune to a radio station. Rotate a picture. Skip to previous title/ chapter/ tracks. Navigate left through menus.
Connections MENU For video discs: Access or exit disc menu. For video disc with playback control: turn on/off Connect to FM Antenna PBC. For USB/data disc playback: switch between Connect the supplied FM wire antenna to the folder/file list/program list. FM antenna socket on the unit.
Connect to an External Audio Device Using COMPONENT socket Connect a progressive scan TV through You can also listen to an external audio device component video for higher quality video. through this unit. Connect component video cables(red/blue/ green-not supplied) to: The VIDEO OUT (Y Pb/Cb Pr/Cr)sockets on this ...
Install Remote Control Batteries Connect the audio player. For audio players with RCA audio output The provided Remote Control allows the unit to sockets: Connect audio cable to the AUX IN be operated from a distance. L/R sockets and to the audio output sockets When operating the Remote Control, point it on the audio player.
Basic Operation Power Press the ENTER or CLOCK button to confirm, You can use all the functions on the panel of the minute indicator will blink. unit or the remote control after connecting to power Set the minute with the button or button.
Play Play a Disc Select a Subtitle Language Caution! You can select a subtitle language on DVDs discs. Never look at the laser beam inside the unit. During play, press the SUBTITLE button. Note: Risk of product damage! Never play discs with For some DVDs, the language can only accessories such as disc stabilizer rings or disc be changed from the disc menu.
For MP3/WMA Files: Press the A-B button at the end point. During play or in stop mode,select a file, then The selected section starts to play press the PROG button to add the file to the repeatedly. To cancel repeat play, press the A -B button program list.
Adjust Settings Zoom in/out Image During video play, press the ZOOM button Introduction repeatedly to zoom in/out the image. This chapter describes how to use the SETUP When the image is zoomed in, you can press menu. Most settings and adjustments are required to pan through the image.
Screen Saver Gamma This adjusts the gamma value of the picture. Select High, Medium, Low or None using the The screen saver starts up if nothing is played Cursor buttons, and press the ENTER button. back and no operations are performed for 4 minutes.
Parental Disable one touch play feature Playback of some DVD discs can be limited depending on the age of the users. The parental One Touch Standby control system allows the playback limitation level to When you press and hold POWER button on RC, be set by the parent.
Listening to the FM Radio Other features Tuning in a Station Set the Alarm Timer In standby mode, you can use the daily timer setting Ensure that you have connected and fully to turn the unit on automatically at a certain time extended the FM antenna.
To keep the warranty valid, never try to repair the Troubleshooting system yourself. If you encounter problems when using this unit, check the following points before requesting service. the AC power plug, and then turn on the system again. No power. Poor radio reception Ensure that the AC cord of the apparatus is connected properly.
Specifications General Power Requirements ......................... AC 120V ~ 60Hz Power Consumption ............................. 45W Output Power ..........................40W x 2 + 80W Total Harmonic Distortion ......................1%(1kHz, 1W) Audio Input Sensitivity/Impedance ..................LINE: 500mV/47kΩ Frequency Response ......................40Hz - 20kHz(+/-3dB) Tuning Range ..........................87.5 - 108.0MHz Unit Dimensions (W x H x D) ....................1016 x 299 x 84mm Speaker Front...