Mio Moov M410 Series Hardware User Manual page 56

7. Complete the following:
If you want to ...
install a yellow map
install a red map
install the selected maps to your Mio
8. Select the destination media (Mio internal memory) for the selected maps, then click Install Maps.
The selected maps will be installed and change colour to green.
9. To use your Mio, disconnect the USB cable. You may need to manually reset your Mio.
WARNING: Do not disconnect the USB cable from the Mio USB Socket until the installed map or
maps have changed colour to green.
How do I remove maps from my Mio?
1. Open MioMore Desktop, and then click My Maps.
2. From the My Mio panel, select the check box next to the map you want to remove.
3. Click Remove Maps to remove the selected maps.
4. Confirm that you want to remove the selected map when prompted. The map is removed from your Mio.
You can reinstall these maps at any time via MioMore Desktop.
Then ...
go back to step 6.
the map needs to be activated via the Internet before it can
be installed; go back to step 4.
continue to step 8.
42