Kustom KPM 8420T Owner's Manual page 5

CHANNELS
1
LINE/MIC Input Jacks:
These are combination input jacks capable of
receiving a Male-XLR for Balanced inputs such as
microphones or a Male ¼" Plug for Line level and
Instrument level devices.
PAD Switch:
This switch attenuates the input signal by 12db in
the out position. Press in when more input signal
gain is needed. If the input sounds distorted, then
use the out position.
LINE/INSTRUMENT Buttons (Channels
7&8 Only):
When the button is out, the ¼" input is configured
to receive a standard Line level input such as a
High-Z microphone, keyboard, drum machine, etc.
When this button is pressed, the input is configured
to receive an input from an electric or acoustic
guitar. No additional preamps are necessary to
amplify acoustic guitars with
Volume Control:
MAIN
Adjusts the volume of the individual channels to
the MAIN output section.
MONITOR Volume Control:
Adjusts the volume of the individual channels to
the MONITOR output section.
Control:
BASS
Adjusts the amount of bass or low frequencies of
the individual channels to the main output section.
(NOTE: This control does not affect the monitor
signal).
2 4
3
piezo pickups.
5 6
MID Control:
Adjusts the amount of mid-range frequencies of the
individual channels to the main output section.
(NOTE: This control does not affect the monitor
signal ).
Control:
TREBLE
Adjusts the amount of Treble or high frequencies
of the individual channels to the main output
section. (NOTE:
monitor signal
EFFECTS 2
This control adjusts the amount of signal sent to the
EFFECTS 2 master section. Note: This control is
post fader, meaning the Effects 2 control gets it's
signal from the MAIN volume control. The MAIN
volume control must be turned up to allow signal
to flow to the EFFECTS 2 Control.
EFFECTS 1
This control adjusts the amount of signal sent to the
EFFECTS 1 master section. Note: This control is
post fader, meaning the Effects 1 control gets it's
signal from the MAIN volume control. The MAIN
volume control must be turned up to allow signal
to flow to the EFFECTS 1 Control.
5
7 8 9
This control does not affect the
).
Control:
Control:
10