Datamax E-Class Mark III Operator's Manual page 18

2) Push out the Supply Hub and load the Supply Roll into the printer as shown. Depending on the
size of the Supply Roll, the Media Bouncer may need to be pushed out of the way.
3) Once the Supply Roll is loaded, slide the Ribbon Handler Latch downward to unlatch the Ribbon
Handler Assembly.
4) Push out the Take-up Hub and load an empty Ribbon Core into the printer as shown.
12
312
312

Supply Roll

Supply Hub

Media Bouncer

Ribbon Handler Latch

Ribbon Handler Assembly

Ribbon Core

Take-up Hub
Chapter 2 – Printer Setup