Using Windows Vista - D-Link DIR-600 User Manual

Section 5 - Connecting to a Wireless Network

Using Windows Vista

®
Windows Vista users may use the built-in wireless utility. If you are using another company's utility or Windows 2000, please
® ®
refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site
survey" option similar to the Windows Vista utility as seen below.
®
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-600 User Manual 56