Shelves And Bins - GE 20 Owner's Manual And Installation Instructions

About the shelves and bins.
Not all features are on all models.
Some models have wire shelves that can
be adjusted in the same manner.
8
Rearranging the Shelves
Shelves in the refrigerator compartment are adjustable.
Refrigerator Compartment
To remove:
Remove all items from the shelf.
Tilt the shelf up at the front.
Lift the shelf up at the back and
bring the shelf out.
To replace:
While tilting the shelf up, insert the top
hook at the back of the shelf in a slot
on the track.
Lower the front of the shelf until the
bottom of the shelf locks into place.
Spillproof Shelves
(on some models)
Spillproof shelves have special edges to
help prevent spills from dripping to lower
shelves. To remove or replace the shelves,
see Rearranging the Shelves.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
To remove:
Remove all items from shelf.
Remove the shelf from the compartment
by lifting up and out.
Remove the glass shelf from the frame
by sliding the shelf out until it stops.
Tuck-Away Shelf
(on some models)
This shelf can retract to half its size for
storage of tall items on the shelf below.
To remove:
Pull the shelf out and up.
Slide the shelf back until it stops.
(on some models)
Pull the shelf up to release it from
the front of the frame.
Slide the shelf back to release it from
the back of the frame.
To reinstall the glass shelf, reverse these
instructions.
Make sure that the shelf sits flat after
reinstallation and doesn't move freely from
side to side.
Make sure you push the shelves all the way
in before you close the door.
To return the shelf to its original position,
pull up and forward on the shelf. Push
down slightly to lock the shelf into
position.