Nokia Asha 200 Service Manual page 15

11) Protect the DISPLAY with protective film. Unscrew
the four Torx+ size 6 screws in the order shown.
13) Remove the ENGINE BOARD including the DISPLAY
and the UI FRAME.
15) Remove the UI FRAME.
15
12) Release the three clips holding the ENGINE BOARD
with the sharp end of the SS-93.
14) Release the four clips holding the UI FRAME with
the SS-93. Be careful not to damage any components
nearby.
16) Open the DISPLAY connector with the SS-34 flex
opening tool. Be careful not to damage the
connector.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia Asha 200 (RM-761)
Nokia Asha 201 (RM-799/RM-800)
Service Manual Level 1&2
Version 1.0