Table of Contents
Advertisement
Main
Info.
System Time:
System Date:
System Memory:
Extended Memory:
Video Memory
Quiet Boot:
Power on Display:
Network Boot:
F12 Boot Menu:
D2D Recovery :
Processor Power Management:
F1
Help
↑ ↓
← →
Esc
Exit
This menu provides you the information of the system.
Parameter
System Time / System
Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Power on display
34
PhoenixBIOS Setup Utility
Advanced
Main
[02:19:31]
[04/21/2004]
624 KB
522240 KB
Shows extended memory size
128 MB
[Enabled]
[Auto ]
[Enabled]
[Disabled]
[Enabled]
Select Item
Select Menu
The hours are displayed with 24 hours format. The values set in these two fields
take effect immediately.
This field reports the memory size of system base memory. The size is fixed to
640KB.
This field reports the memory size of the extended memory in the system.
Extended Memory size = Total memory size - 1 MB
VGA Memory size = 64/128MB
Customer Logo display will be shown during POST when it is selected.
Auto: During power on process, the system will detect if any display
device is connected on external video port. If any external display device is
connected, the power on display will be in CRT (or projector) only mode.
Otherwise it will be in LCD only mode.
Both: Simultaneously enable both the integrated LCD screen and the system's
external video port (for an external CRT or projector).
Security
Shows system base memory size
VGA memory size
[Enabled]
F5/F6
Change Values
Enter
Select
Sub-Menu
Description
Boot
Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9
Setup Defaults
F10
Save and Exit
Chapter 2
Advertisement
Table of Contents
