Front Wheel - Honda CTX1300 Owner's Manual

When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙

Front Wheel

Removal
1. Park on a firm, level surface.
2. Cover both sides of the front wheel and
brake calipers with protective tape or
cloth.
3. On the left side, remove the mounting
bolts and remove the brake caliper.
Left side
Mounting bolts
Tyre Puncture
4. On the right side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not pull the brake lever or push the
brake pedal while the brake caliper is
removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
Right side
Tape or
cloth
Brake calipers
Wheel speed sensor
u Removing Wheels
Pulser ring
Mounting
bolts
continued 123