Table of Contents
Advertisement
1.3.2 The [+] Button
Is located on the bottom right of the Wristop Computer.
•
In the setup process, pressing the [+] button changes or scrolls the value upward.
•
In the timing and logbook functions, this button can act as a start/stop (or On/Off) button.
1.3.3 The [-] Button
Is located on the bottom left of the Wristop Computer.
•
In the setup process, pressing the [-] button changes or scrolls the value downward.
•
For the Vector and X-Lander models this button is also known as the “Fast Bearing” button. Pressing
the [-] button in any of the main modes will quickly display the compass mode, showing either the normal
compass or bearing tracking feature (depending on what display has been chosen in the compass mode).
•
For the Altimax model, this button is also called the “Fast Cumulative” button. Pressing the [-] button in any
of the main modes will quickly display the cumulative information of the current logbook recording.
1.3.4 The [Select] Button
Is located on the top left of the Wristop Computer.
•
In the main mode level, pressing the [Select] button allows the user to enter into the sub modes of the
particular function or return to the main mode the user is in.
•
In the main mode or sub mode, pressing and holding the [Select] button for more than 2 seconds allows the
user to enter the setup process.
•
In the setup process, the [Select] button allows the user to move between settable units or values and
determine preferences.
1.4 LCD DISPLAY
The display is designed to offer maximum clarity and simplicity to the user.
8
Hide quick links:
Advertisement
Table of Contents
