Tips For Optimal Performance - ActionTec ScreenBeam Pro Education Edition 2 User Manual

Miracast™
To connect a Miracast™-enabled Android device to the Receiver, use the following
procedure. For best performance, the Miracast™ device should be running the latest
software.
1. On a Miracast™-enabled Android device, locate and open the Wireless
Display Application (check for the application under Settings).
Note: The name of the Wireless Display application depends on the device
type and model. Refer to the device's user manual for more details.
2. The Wireless Display application scans for available devices. Select the
Receiver from the device list. A PIN may be required.
Note: Obtain the security PIN from the network administrator if no PIN
is displayed on the connected display device. By default, the security PIN is
"12345670. " If a PIN is displayed on the connected display device, enter this
PIN in the PIN text box.
3. Enter the PIN in the PIN text box, then click Connect.
4. Wait for the device to pair with and connect to the Receiver. When it does,
the source device's screen will be displayed on the monitor.

Tips for Optimal Performance

To get the most out of the Receiver:
Keep the Receiver in line-of-sight in relation to the source device. This will
s
help ensure the Receiver receives the best possible signal.
The Receiver's optimal wireless range is within 30 feet of the source device.
s
However, actual range and effectiveness depends on many factors, including
the amount of existing signal interference and the building materials used in
the surrounding structure.
Avoid placing the Receiver near other possible sources of interference (such
s
as electric fans or other devices with electric motors), microwave ovens, and
cordless phones.
ScreenBeam Pro Education Edition 2
16