Download
Share
Print this page
Hayter M10 Instruction Book
  1. Manuals
  2. Brands
  3. Hayter Manuals
  4. Tractor
  5. HERITAGE M10
  6. Instruction book
Hayter M10 Instruction Book

Hayter M10 Instruction Book

Heritage
Hide thumbs Also See for M10:

Advertisement

Quick Links

Download this manual See also: Instruction Book
M10/30
HERITAGE TRACTOR
CODE 134E
INSTRUCTION BOOK
CAUTION: Read and
follow all instructions.
Code
Serial No.
Part No. 111-3047 (Rev A)
134E
290000001
1742440
Revision A
Issue 02/2009

Advertisement

loading

Related Manuals for Hayter M10

Summary of Contents for Hayter M10

  • Page 1 M10/30 HERITAGE TRACTOR CODE 134E INSTRUCTION BOOK CAUTION: Read and follow all instructions. Code Serial No. Part No. 111-3047 (Rev A) 134E 290000001 1742440 Revision A Issue 02/2009...
  • Page 3 7 (25x3) 6 (17x146) 4 (17x47) 5 (1001054) 6 (2x82) 6 (2x82) 7 (14x79)
  • Page 5 9/16...
  • Page 9 150N 25x3 17x146 327349 1001054 17x47 2x82 14x79...

  • Page 10: Limited Warranty

    LIMITED WARRANTY Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufac- turer of the engine furnish their own warranty and services are provided through their authorised network (Refer to “Engine Warranty Statement”).

  • Page 11: Table Of Contents

    CONTENTS LIMITED WARRANTY INTERNATIONAL PICTORIALS OWNER’S INFORMATION SAFE OPERATION PRACTICES ASSEMBLY OPERATION MAINTENANCE CHART MAINTENANCE TROUBLESHOOTING CHART DANGER: Keep People, Especially INTERNATIONAL PICTORIALS Control And Operating Pictorials Children, Away From Unit. (Figure 26) IMPORTANT: The following pictorials are DANGER: No Step. Engine Start located on your unit or on literature supplied with the product.

  • Page 12: Owner's Information

    8. Stop the blades rotating before crossing OWNER’S INFORMATION Preparation surfaces other than grass. 1. While mowing, always wear substantial 9. When using any attachments, never direct Know your product: If you understand the unit footwear and long trousers. Do not operate discharge of material toward bystanders nor and how the unit operates, you will get the best the equipment when barefoot or wearing...
  • Page 13 4. If the battery (1) is put into service after the ASSEMBLY WARNING: Follow the engine battery date, the battery (1) must be manufacturer’s instructions for the charged. See “How To Charge The All fasteners are in the parts bag. Do not discard type of petrol and oil to use.
  • Page 14 blade in the ENGAGE position (9). OPERATION How To Use The Parking Brake 3. To stop the blade, move the blade rotation (Figure 7) control (1) to the DISENGAGE position NOTE: Illustrations and pictorials begin on 1. Completely push the clutch/brake pedal page 2.
  • Page 15 7. Slowly release the clutch/brake pedal. How To Install The Side Discharge Add Petrol 8. Move the throttle control to the FAST Attachment (Figure 12) WARNING: Always use a safety petrol position. If you need to go faster or slower, container.
  • Page 16 8. When you mow large areas, start by turning Mowing And Bagging Tips Mulching Tips to the right so that the cut grass will 1. For a lawn to look better, check the cutting When you use a mulcher attachment, the grass discharge away from shrubs, fences, level of the mower housing.

  • Page 17: Maintenance Chart

    MAINTENANCE CHART FREQUENCY MAINTENANCE REQUIRED COMMENTS Maintenance engine. Refer to the Engine Owner’s Manual. Daily or before each use Examine blade(s). Check for cracks, wear, and excessive damage. Remove debris from unit and mowing area. Examine all rotating and sliding parts. Check tire inflation.
  • Page 18 2. Remove the cotter pin (1), washer (2), and How To Check The Blade Rotation How To Charge The Battery (Figure 3) brake spring (3) from the adjustable Control WARNING: When you charge the nut (4). battery, do not smoke. Keep the 3.
  • Page 19 Where To Lubricate (Figure 21) How To Remove The Mower Housing How To Replace The Fuse If the fuse is blown, the engine will not start. 1. (Figure 6) Move the blade rotation control Models with grease fittings: Remove the fuse and replace with a 15 amp. (1) to the DISENGAGE position (8).
  • Page 20 TROUBLESHOOTING CHART PROBLEM: The engine stops when the PROBLEM: The mower housing does blades are engaged. not cut level. 1. Check the wiring harness for damage or a 1. Check the air pressure in the tyres. PROBLEM: The engine will not start. loose connection.
  • Page 24 BRIGGSandSTRATTON Yard Power Products Group Copyright © 2009 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved...

This manual is also suitable for:

M30