Related Manuals for Krell Industries RS-232
Summary of Contents for Krell Industries RS-232
- Page 1 SACD Standard Super Audio THE LEADER IN AUDIO ENGINEERING Compact Disc Player RS-232 Port: Sending Commands and Interpreting Data RC-6 Remote: Commands Developer’s Reference...
-
Page 2: Contact Information
WEBSITE http://www.krellonline.com This product is manufactured in the United States of America. Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. All other trademarks and trade names are registered to their respective companies. - Page 3 This document is designed for application developers who want to control the SACD Standard using an external computer-based device. The document contains five sections: Connecting to the RS-232 Port, including the RS-232 connector diagram, and RS-232 Port Protocols, on page 4...
-
Page 4: Connecting To The Rs-232 Port
Located on the back panel of the SACD Standard RS-232 Port Protocols A 9-pin RS-232 port is located on the right-hand side of the SACD Standard back panel. Make sure the clamping screws (or thumb- screws) securely fasten the connection cable from the external computer-based device to the RS-232 port on the SACD Standard. - Page 5 RS-232 Commands for the SACD Standard Krell SACD Standard Developer’s Reference COMMAND Power On Power Off Toggles the Power Open / Close Transport Reverse Search Forward Search Play Forward Track Reverse Track Re-start Track Pause Stop Area Display Scan Shuffle...
- Page 6 Power The SACD Standard reports its operational status by transmitting a block of status data via the RS-232 connector. The block is configured as three 8-bit words. The first and last word always contains hexadecimal code 55 to facilitate message framing and synchronization. When the data block is sent through an RS-232 port, each 8-bit word transmitted will also have 1 stop bit associated with it.
- Page 7 RS-232 Status Block Descriptions, Word 3: End of Message Description Bit 7 – 0: Hexadecimal 55 continued Krell SACD Standard Developer’s Reference...
- Page 8 RC-6 Commands for the SACD Standard The following codes are used for controlling the SACD Standard via IR. SYSTEM SYSTEM COMMAND (HEX) (DEC) (HEX) COMMAND (DEC) COMMAND SACD Power Stop Sound Mode Play Reverse Pause Slow Forward Previous Resume Next Disc Display Shuffle...