Playing Discs; Basic Playback - Koss KS4380-2 Instruction Manual

Playing Discs

This chapter describes how to play a DVD/CD/MP3 disc.

Basic Playback

IMPORTANT:
Please note that some DVD movie discs may not have all
the features described in this chapter. For example, older
movies may not allow you to select multiple camera
angles. Refer to the instructions or liner notes that are
included with each disc to determine what features and
operations are available on that particular disc.
1. Turn on your TV and select the "Video Input" or
"External Source" so that you can view the picture from
this system on your TV. Refer to the TV instruction
manual if necessary.
2. Press the ON/STANDBY button on the front panel of
this system or POWER button on the remote control.
This Standby indicator goes off and the main display
comes on. Note: The main power switch on this system
must be 'On'.
3. If necessary, press the DVD function button on the
front panel of this system, or the FUNCTION button on
the remote control to select the DVD function. The
DVD logo screen should appear on your TV.
4. Press the OPEN/CLOSE button on the front panel of
this system or EJECT button on the remote control to
open the disc drawer. Place a disc on the tray label
side up. Be sure that the disc is correctly centered in
the disc pocket. Press the OPEN/CLOSE button again
to close the drawer. The player begins loading the
disc. An operating massage will appear on the TV
screen.
When a disc is inserted the following will occur depending
on the type of disc inserted.
When playing a DVD.
A DVD menu or title menu may appear on the TV screen.
When playing a CD or MP3.
The CD will begin to play the disc from the first track.
Note: While the disc is loading, the player will not respond
to any commands.
21
5. On most DVD movie discs a 'Disc Menu' will appear
on your screen. This allows you to jump to a specific
chapter or scene, or to view other special features
that the director may have included on the disc. Use
the Navigation buttons (< / > / Ù / Ú) on the
remote control to highlight the desired action and
then press the ENTER button to select it. Or you may
simply press the PLAY button to start playback at the
beginning of the movie. Note: The appearance of the
DVD Menu Screens varies from disc to disc. Some
older discs may not have any DVD Menu Screen and
will just begin playback of the movie automatically.