Power Cords - Fujitsu ETERNUS DX60 S2 User Manual

MiniSAS Cables
When the drive enclosure is installed, connect the DI (OUT) port of the controller enclosure to the DI (IN)
port of the drive enclosure with the miniSAS cable.
Cable
Underside of the DI (OUT)
●
side plug
The " " symbol is
indented here.
Underside of the DI (IN)
●
side plug
The " " symbol is
indented here.
-Installation- "4.3 Drive Enclosure Connection"

Power Cords

Connect the power cords to the inlets of the power supply unit.
Use release ties to hold the power cords in place.
Cable
-Installation- "4.5 Power Cord Connection"
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
Rear view
DI (IN) port
DI (OUT) port
Rear view
10
Copyright 2014 FUJITSU LIMITED
Plug the connectors with the "
into the DI (IN) ports of the drive enclosure.
Plug the connectors with the "
into the DI (OUT) ports of the controller enclosure.
" symbol indented on them
Drive
Enclosure
Controller
Enclosure
" symbol indented on them
Drive
Enclosure
Controller
Enclosure
P3AM-5542-07EN