Ps4™ Setup - Turtle Beach Elite 800 User Manual

PS4™ Setup
Primary Output Port
Select the input format supported by the device (TV, AV amplifier or receiver) that is connected using the
DIGITAL OUT (OPTICAL) port.
Note that if the device does not support the selected format, the speakers might be damaged.
Dolby Digital 5.1ch
DTS 5.1ch
AAC
Linear PCM 44.1kHz
Linear PCM 48.kHz
Enter Back
x
Audio Output Settings
Primary Output Port
Audio Format (Priority)
Enter Back
x
Audio Devices
Input Device
Output Device
Adjust Microphone Level
Volume Control (Headphones)
Output to Headphones
x Enter Back
OK
Linear PCM
Bitstream (Dolby)
Bitstream (DTS)
USB Headset(Turtle Beach Elite 800 Chat)
USB Headset(Turtle Beach Elite 800 Chat)
Chat Audio
User 1
Go to Table of Contents
4. In the PS4 menu, go to Settings > Sound and Screen >
Audio Output Settings > Primary Output Port > Digital Out
(OPTICAL).
5. In the check-off boxes, select ONLY Dolby Digital 5.1 ch.
NOTE: Do not select DTS. While the Elite 800 features DTS
Headphone:X surround sound, the system requires a Dolby
Digital input signal.
6. Go to Settings >> Sound and Screen >>
Audio Output Settings >> Audio Format (Priority)
7. Select Bitstream (Dolby)
8. Go to Settings >> Devices >> Audio Devices
9. Select USB Headset(Turtle Beach Elite 800 Chat)
for Input & Output Device
10. Set Output to Headphones to Chat Audio
11. Set Volume Control (Headphones) level to maximum
12