System Messages - QNAP HS-251 Hardware User Manual

7. Password
The default password of the LCD panel is blank. Enter this option to change the
password of the LCD panel. Select "Yes" to continue.
C h a n g e
Y e s
Enter a password of maximum 8 numeric characters (0-9). When the cursor moves to
"OK", press the "Enter" button. Verify the password to confirm the changes.
N e w P a s s w o r d :
8. Back
Select this option to return to the main menu.

System Messages

When the NAS encounters system error, an error message will be shown on the LCD panel.
Press the "Enter" button to view the message. Press the "Enter" button again to view the
next message.
S y s t e m
P l s . C h e c k
System Message
Sys. Fan Failed
Sys. Overheat
HDD Overheat
CPU Overheat
Network Lost
LAN1 Lost
LAN2 Lost
HDD Failure
Vol1 Full
HDD Ejected
Vol1 Degraded
Vol1 Unmounted
Vol1 Nonactivate
P a s s w o r d
N o
→
E r r o r !
L o g s
The system fan fails
The system overheats
The hard drive overheats
The CPU overheats
Both LAN 1 and LAN 2 are disconnected in failover or
load-balancing mode
LAN 1 is disconnected
LAN 2 is disconnected
The hard drive fails
The volume is full
The hard drive is ejected
The volume is in degraded mode
The volume is unmounted
The volume is not activated
59
O K
Description