Table of Contents
Advertisement
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3
Connect the
Connect the
Connect the USB 3.0 cable to port.
4
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
5
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Downloaded from ManualMonitor.com Manuals
monitor and the other end to the computer's port.
USB Cable(Optional)
USB 3.0 cable to port for fast charge.
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
9
Advertisement
Table of Contents
