PRESONUS FireStudio Mobile Owner's Manual page 19

Owner's Manual
Click OK.
If you have a sound module you'd like to connect,
leave the External Devices window open and
proceed to the next part of this section. If not, you
can close this window and skip to Section 2.1.4.
Setting Up an External MIDI Sound Module
Controller From the Start Page:
MIDI instrument controllers (keyboards, MIDI
guitars, etc.) send musical information in the form
of MIDI data to tone modules, which respond by
generating sound, as instructed. Tone modules can
be standalone sound devices or can be integrated
into a controller, as with a keyboard synthesizer.
Studio One Artist refers to all tone generators
as Instruments. Once you have set up your MIDI
keyboard controller, take a moment to configure
your sound module.
1 Connect the MIDI In of your external sound
module to the MIDI Out of the MIDI-S/PDIF
breakout cable
that came with your FireStudio Mobile. Make sure
GETTING STARTED
Studio One Artist 2.2
the break-
out cable is
securely
connected
to your
FireStudio
Mobile.
2
19