Setting Shipout Code (When Main Board Is Exchanged) - Toshiba 65L9400U Series Service Manual

SETTING SHIPOUT CODE (when Main board
is exchanged)
When Main board is exchanged, the shipout code needs to be set up according to the each
Destination.
Please install the each Model Setting File in the following procedure.
1. Use the USB mass storage device formatted with "FAT32".
2. Copy the following file to the root of the USB mass storage device.
<Use below file to change the shipout code to USA>
USA¥Model_Setting_L8400_58_C.bin
58L8400U:
USA¥Model_Setting_L9400_65_C.bin
65L9400U:
<Use below file to change the shipout code to Canada>
Canada¥Model_Setting_L8400_58_C.bin
58L8400UC:
Canada¥Model_Setting_L9400_65_C.bin
65L9400UC:
<Use below file to change the shipout code to Mexico>
Mexico¥Model_Setting_L8400_58_C.bin
58L8400UM:
Mexico¥Model_Setting_L9400_65_C.bin
65L9400UM:
(1/3)