Towing - Ferrari 458 Italia Owner's Manual

Warning
The kit must be used in "tyre inflation" mode. Refer to the
instruction manual supplied with the kit.
• Inflate the spare wheel to the indicated pressure (see page 28).
• Lower the vehicle and remove the jack.
• Tightly fasten the stud bolts, alternately going from one stud bolt
to one that is diametrically opposite.
As soon as possible, tighten the stud bolts with the torque wrench
to a torque of 100 Nm.
Warning
The spare wheel does not have a tyre pressure monitoring
sensor (see label on spare wheel tool bag). After fitting, it is
not checked by the system but complies with international
regulations ECE R64/01.
After fitting, we recommend that you go to the nearest Ferrari
Service Network.
Advice for Emergency Situations
196

Towing

When towing the vehicle, avoid using anchor points that are not
designed for tow hook A inserted in housing C.
Proceed as follows:
• Take tow hook A out of the tool bag;
• Open cover B in the right-hand side of the front bumper;
• Tightly screw tow hook A into housing C;
• Release the EPB;
• Release the Park Lock.
Warning
If there is an electrical system failure, release the EPB and Park
Lock manually (see pages 204-206).
A
B