Problem
No image appears on the
LCD monitor.
Cause
The camera is not turned
on.
The camera is not in PLAY
mode.
The batteries are
exhausted.
The batteries are inserted
incorrectly.
There is no compact flash
card in the camera (
appears in the data panel).
The compact flash card is
not inserted properly in the
camera.
No action was taken on the
camera for longer than
approximately 3 minutes
after the camera was
turned on (Auto Power Off
feature has activated).
- 119 -
TROUBLESHOOTING
Solution
Move the lens cover slide
to
, then press and hold
the display/ENTER button
about 1 second.
Replace all four batteries
or use the AC adapter.
Remove the batteries and
replace in the correct
orientation (P. 18).
Insert a compact flash card
in the camera (P. 23).
Remove the compact flash
card temporarily and
reinsert it (P. 23 - 25).
To restore power in REC
mode, move the lens cover
slide to
, then re-set to
.
To restore power in PLAY
mode, press and hold
display/ENTER button
about 1 second.
Continued on Next Page