24
MAIN COMPONENTS
(Necessary information to operate the motorcycle)
WARNING
!
If the Pre-riding Inspection (page 46) is not
performed, severe personal injury or motorcycle
damage may result.
Suspension
Each rear shock absorber (1) has 5 adjustment
positions for different load and riding conditions. Use a
pin spanner (2) and an extension bar (3) to adjust the
rear shock absorbers.
Position 1 is for light loads and smooth road
conditions. Positions 3 to 5 progressively increase
spring pre-load for a stiffer rear suspension. They
should be used when the motorcycle is heavily loaded
or when the road is not smooth.
Make sure both shock absorbers are adjusted in the
same position.
Standard position: 2
1 2 3 4
5
(2)
(3)
(1)
Owner's Manual
(1) Shock absorber
(2) Pin spanner
(3) Extension bar