Installing And Changing The Battery; Battery Condition Indicator; Auto Power Save - Konica Minolta DYNAX DYNAX7D Instruction Manual

INSTALLING AND CHANGING THE BATTERY

This digital camera uses one NP-400 lithium-ion battery.
Before using the battery, read the safety warnings on
pages 4 of this manual. When replacing batteries, the
camera should be off.
Open the battery-chamber door by sliding the battery-
chamber release toward the back of the camera.
Insert the battery with the battery contacts first. Push the
battery into the chamber until the battery latch clicks into
place.
To remove a battery, slide the battery latch to the side of
the battery chamber; the battery will spring out.
Close the battery-chamber door until it clicks shut.
Getting up and running
2 2 2 2

BATTERY CONDITION INDICATOR

This camera is equipped with an automatic battery-condition indicator.
When the camera is on, the indicator appears on the monitor. The
indicator changes from white to red when battery power is low. If the
monitor is blank, the battery may be exhausted.
Full-battery indicator - the battery is fully charged.
Low-battery indicator - battery power is low. Recharge the battery.
Low-battery warning - battery power is very low. Recharge the battery.
When power falls below the level of the low-battery warning, the battery exhausted message
appears just before the camera shuts down. The camera will not function until the batteries are
recharged.

AUTO POWER SAVE

To conserve battery power, the camera shuts down if an operation is not made within three minutes.
To restore power, press the shutter-release button partway down. The length of the auto-power-save
period can be changed in section 3 of the setup menu (p. 102).
The LCD monitor backlight turns off after five seconds. Press a camera button to restore the
display. The length of this period can be changed in section 3 of the setup menu (p. 102).
System Accessories
This camera can be powered directly from a household electrical outlet with the optional AC
Adapter AC-11. See page 114 on how to connect the adapter to the camera. Contact your
local Konica Minolta dealer for more information.
2 2 3 3