Electromagnetic Compatibility - 3Com ADSL Modem Ethernet Installation Manual

Service can be obtained at: 3Com Corporation,1800 W. Central Avenue., Mount
Prospect, IL 60056
If the device is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
This registered device is capable of providing users access to interstate providers of
operator services through the use of equal access codes.
I S C
NTERNATIONAL TATEMENTS OF ONFORMITY

Electromagnetic Compatibility

This equipment was tested and found to conform to the Council Directive
89/336/EEC for electromagnetic compatibility. Conformity with this Directive is based
upon compliance with the following harmonized standards:
EN 55022: 1994 Limits and methods of Measurement of Radio Interference.
A1: 1995 A2: 1997This equipment conforms to the Class B limits. (CISPR 22, 1993)
AS/NZS3548Australian / New Zealand Limits and Methods of Measurement of
Information Technology equipment. This equipment conforms to the Class B limits.
EN 50082-1: 1992Electromagnetic Compatibility Generic Immunity Standard:
Residential, Commercial and Light-Industrial Environment (January 1992)
With IEC 801-2(1984); IEC 801-3 (1984); IEC 801-4 (1988)
VCCI Conformity
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a
radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
Safety (Low Voltage Directive)
This equipment was tested and found to conform to the Council Directive 72/23/EEC
for safety of electrical equipment. Conformity with this Directive is based upon
compliance with the following harmonized standard:
EN 60950 1992: A4 1997 Safety of Information Technology Equipment
TS001 & AS/NZS3260 Australian/ New Zealand standard for Safety of
Information Technology Equipment Including Electrical Business Equipment.