Table of Contents
Advertisement
ENGLISH
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
8
Technical data
Input voltage
Power input
Orbits (no load)
Sanding base surface
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L
) 86 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L
) 97 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN 60745:
Vibration emission value (a
uncertainty (K) 1.5 m/s
EC declaration of conformity
MACHINERY DIRECTIVE
KA191E / FS4000ROS / XTA90EK
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4
These products also comply with Directive
2004/108/EC and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
_
The undersigned is responsible for compilation of the technical
Black & Decker Europe, 210 Bath Road, Slough,
KA191E/FS4000ROS/
XTA90EK
Type 3
V
230
AC
W 480
min
4,000 - 12,000
-1
mm ø 125
kg 2.47
) 6.94 m/s
,
2
h
2
%
Kevin Hewitt
Vice-President Global Engineering
Berkshire, SL1 3YD
United Kingdom
02/04/2013
- Quick Links:
- Overview
- Intended Use
- Maintenance
- Technical Data
Hide quick links:
Advertisement
Table of Contents
