Table of Contents
Advertisement
Maintenance and Specifications
• 3.0L V6 engine
If required, add engine oil to the engine. Refer to Adding engine oil in
this chapter.
•Do not overfill the engine with
oil. Oil levels above this mark
may cause engine damage. If the
engine is overfilled, some oil must
be removed from the engine by an
authorized dealer.
7. Put the dipstick back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to Checking the engine
oil in this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level dipstick.
4. Install the dipstick and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap clockwise
until it stops.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level dipstick and/or the engine oil filler cap removed.
282
2011 Milan (mln)
Owners Guide, 1st Printing
USA (fus)
Advertisement
Table of Contents
