uuIndicatorsu
Indicator
Name
System Message
Indicator
Turn Signal
Indicators
High-Beam
Indicator
Lights On
Indicator
Fog Light
Indicator
*
* Not available on all models
70
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Comes on along with a beep when a
●
problem is detected. A system
message on the multi-information
display appears at the same time.
Blink when you operate the turn
●
signal lever.
Blink along with all turn signals if you
●
press the hazard warning button.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch
●
is on, or in AUTO when the exterior
lights are on.
Comes on when the fog lights are
●
on.
Explanation
While the indicator is on, press the
●
(information) button to see the message
again.
Refer to the Indicators information in this
●
chapter when a system message appears on
the multi-information display. Take the
appropriate action for the message.
The multi-information display does not return
●
to the normal screen unless the warning is
canceled, or the
button is pressed.
Does not blink or blinks rapidly - A turn
●
signal light bulb has blown. Change the
bulb immediately.
2 Replacing Light Bulbs P. 278, 280
—
If you set the power mode to ACCESSORY
●
or VEHICLE OFF (LOCK) while the exterior
lights are on, a chime sounds when the
driver's door is opened.
—
Message
—
—
—
—
—