Brake Fluid Level; Power Steering Fluid Level - PEUGEOT RCZ Handbook

Topping up the engine oil level
Oil grade
The oil must be the correct grade for your engine and conform to the
manufacturer's recommendations.
Refer to the "Petrol engine" or "Diesel engine" section to identify the
location of the oil fi ller cap in the engine compartment of your vehicle.
- Unscrew the oil fi ller cap to reveal the fi ller aperture.
- Add oil in small quantities, avoiding any spills on engine
components (risk of fi re).
- Wait a few minutes before checking the level again using the
dipstick.
- Add more oil if necessary.
- After checking the level, carefully refi t the oil fi ller cap and the
dipstick in its tube.
After topping up the oil, the check when switching on the ignition with
the oil level indicator in the instrument panel is not valid during the
30 minutes after topping up.
Engine oil change
Refer to the warranty and maintenance record for details of the interval
for this operation.
In order to maintain the reliability of the engine and emission control
system, the use of additives in the engine oil is prohibited.

BRAKE FLUID LEVEL

The brake fl uid level should be close to the "MAX" mark. If it is
not, check the brake pad wear.
Changing the fluid
Refer to the warranty and maintenance record for details of the interval
for this operation.
Fluid specification
The brake fl uid must conform to the manufacturer's recommendations.

POWER STEERING FLUID LEVEL

The power steering fl uid level should be close to the "MAX"
mark. With the engine cold, unscrew the cap to check the level.