Xerox WorkCentre 4265 User Manual page 37

4. In the Installation Wizard, to begin, select your chosen language and keyboard layout, then touch
Next.
5. On the Product Enablement Settings screen, follow the directions.
6. At step 2 of the Installation Wizard, insert the Product Enablement Key into the card reader slot at
the back of the printer.
7. When the green LED light stops blinking and remains illuminated for approximately 10 seconds,
remove the Product Enablement Key from the card reader slot.
Touch Continue.
8.
9. Configure settings as needed, then to restart the printer and save your settings, touch Restart. To
adjust your settings, touch Back.
10. When the Services screen appears, the printer is ready for use.
If the printer prompts you for Supplies Plan Activation during setup, enter your activation code.
® ®
Xerox WorkCentre 4265 Multifunction Printer
Installation and Setup
37
User Guide