Toyota Camry 2011 Quick Reference Manual page 371

Hide thumbs Also See for Camry 2011:

Table of Contents

3-7. Other interior features

When the indicator light on the HomeLink

ceiver starts to flash rapidly, release the buttons.

Test the operation of HomeLink

grammed button. Check to see if the gate/device operates

Repeat the steps above to program another device for each of

the remaining HomeLink

Programming other devices

To program other devices such as home security systems, home

door locks or lighting, contact your authorized Toyota dealer for

Reprogramming a button

The individual HomeLink

reprogrammed. To reprogram a button, follow the "Programming"

instructions.

Operating HomeLink

Press the appropriate HomeLink

light on the HomeLink

continues to send a signal for up to 20 seconds as long as the

button is pressed.

Erasing the entire HomeLink

buttons cannot be erased but can be

button. The HomeLink

transceiver should turn on.

memory (all three programs)

I n f o r ma t i o n P r o v i d e d b y :

Press and hold down the 2 out-

side buttons for 20 seconds until

the indicator light flashes.

compatible trans-

by pressing the newly pro-

If you sell your vehicle, be sure to

erase the programs stored in the

Show Quick Links

Table of Contents