Table of Contents
Advertisement
Settings Pages
Using the Settings Pages
When opened, the Settings pages appear in the center of the panel display. Please note that many of the pages may be
longer than they initially appear. To reach additional functions on a given page, the page itself may be scrolled up and
down to reveal those functions.
The Settings pages use the subpage feature. Not all menu items on a Settings page
are visible on screen at one time, and scrolling up and down to see them may be
necessary. In the case of long Settings pages, a scroll bar appears momentarily when
a new subpage viewer appears, and allows you to gauge current position and length
of the page.
Many of the entries on Settings pages are read-only, or may be modified if information on the same or another Settings
page is changed. The current information on a page appears in blue under the main category title; press the arrow to the
right in order to open the category's Settings page (FIG. 3).
If the arrow is grey, then the Settings page associated with that category is currently disabled (FIG. 4). This may be
altered with changes in connectivity (connecting a USB stick to the touch panel, for instance) or changes to other
Settings pages.
FIG. 3
Settings page with multiple modifiable sections
FIG. 4
Settings page with enabled and disabled arrows
Navigation Controls and Connection Status
Use the navigation controls in the title bar of each Settings page to go back to the previous page, view the current
connection status, and close the current Settings page (FIG. 5):
Go to Previous
Settings page
FIG. 5
Settings pages - Title bar Navigation Controls and Connection Status
4
Drag the slidebar to adjust the panel brightness.
Press the button to enable or disable the feature.
Use the Up/Down arrows to adjust the information
listed between them.
Press the arrow to move to the next page (in this case,
the Calibration Test page).
This function is currently disabled
Current Master IP/URL Setting
Press this arrow to go to the
Master Port Number keypad
and modify its settings.
Connection Status - A green bar signifies that the panel
has an active connection to the Master.
Close this Settings page
Modero G4 Touch Panels - Configuration and Programming
Advertisement
Table of Contents
