Main barrel·Lens barrel B
● Fit and insert the lens barrel B 2 into the main barrel 1 and mount it by turning clockwise.
● Move the lens barrel B 2 forward to the TELE side and mount FPC to the main barrel 1.
Set it to "TELE" and pass
FPC through the hole of
the main barrel.
②
Straight guide B
● Push in the lens barrel A/B 1 by approx. 5mm and insert the straight guide B 2.
● Fit the hole of the straight guide B 2 to the boss of the lens barrel A/B 1 and tighten
the three screws 3.
③×3
①
Fit the boss.
②
- A4 • One Touch Zoom 90s AF -
Oil: MZ-800S
Apply it to the inside groove.
Fit the groove of the main
barrel to the place where
the gear of the lens barrel
B is changed.
①
FCA54001-R.3567.A