13. Carefully open the flex connector with the SS-93. Avoid
mechanical stress to the connector and the flex foil.
15. Flip over the TOP BOARD MECH ASSY now. Disconnect the
flex connector with the SS-93.
17. Now carefully lever up the glued in KEY FLEX ASSY.
Page
13
(21)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
14. Carefully lever up the TOP BOARD MECH ASSY. Keep in mind
that a flex foil is still connected.
16. For replacement of the MUSIC KEY FLEX ASSY, disconnect the
flex connector first.
18. Lift out the 1ZC-D CAMERA FLEX. Mind the sharp metal latches
on order to avoid cutting the delicate flex foil. It is not necessary
to remove the camera flex if the CAMERA MODULE should be
replaced only. In this case simply peel up the CAMERA GASKET and
lift out the CAMERA MODULE with the SS-45.
6263 RM-207 / 6267 RM-210
Service Manual Level 1&2
ISSUE 4