Common Commands And Messages - Simrad HS60 User Manual

Common commands and messages

The table below "Received messages based on a request" and the ta-
ble on the next page "Transmitted messages" provide brief descrip-
tions of common NMEA commands and messages for the HS60.
Received messages based on a request
PG No.
Description
(PGN)
059392 ISO acknowledgement
Used to acknowledge the status of
certain requests addressed to a specific
ECU.
059904 ISO request
Request the transmission of a specific
PGN, addressed or broadcast.
060928 ISO address claim
Used to identify to other ECUs the ad-
dress claimed by an ECU.
126996 Product information
NMEA 2000 database version supported,
manufacturer's product code, NMEA
2000 certification level, Load Equivalency
number, and other product-specific
information.
126464 Receive/transmit PGNs group function
The Transmit / Receive PGN List Group
type of function is defined by first field.
The message will be a Transmit or Re-
ceive PGN List group function.
129538 GNSS control status
GNSS common satellite receiver param-
eter status.
129545 GNSS RAIM output
Autonomous Integrity Monitoring (RAIM)
process. The Integrity field value is based
on the parameters set in PGN 129546
GNSS RAIM settings.
129546 GNSS RAIM settings
Used to report the control parameters
for a GNSS Receiver Autonomous Integ-
rity Monitoring (RAIM) process.
Operation | HS60 GPS Compass User Guide
Default
Update Freq.
Rate (Hz)
(msec)
On On
Request Request
On On
Request Request
On On
Request Request
On On
Request Request
On On
Request Request
On On
Request Request
On On
Request Request
On On
Request Request
| 13