Important Information; Iec 60825-1 Specification; Laser Diode; Disconnect Device - Brother FAX-2920 User Manual

10

Important information

IEC 60825-1 Specification

This machine is a Class 1 laser product as defined
in IEC 60825-1 specifications. The label shown
below is attached in countries where required.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
This machine has a Class 3B Laser Diode which
emits invisible laser radiation in the Scanner Unit.
The Scanner Unit should not be opened under any
circumstances.

Laser Diode

Wave length: 770 - 810 nm
Output: 5 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure.

Disconnect device

This product must be installed near an electrical
socket that is easily accessible. In case of
emergencies, you must disconnect the power cord
from the electrical socket to shut off power
completely.
LAN connection
(MFC-7225N only)
CAUTION
Do not connect this product to a LAN
connection that is subject to over-voltages.
International E
NERGY
Compliance Statement
The purpose of the International E
Program is to promote the development and
popularization of energy-efficient office equipment.
®
As an E S Partner, Brother Industries,
NERGY TAR
Ltd. has determined that this product meets the
®
E S guidelines for energy efficiency.
NERGY TAR
Radio interference
(220-240V Model only)
This product complies with EN55022 (CISPR
Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use the
following interface cables.
1.A USB cable which must not exceed 2.0 metres
in length.
2.A shielded parallel interface cable with
twisted-pair conductors and that is marked
"IEEE 1284 compliant". The cable must not
exceed 2.0 metres in length.
®
S
TAR
®
S
NERGY TAR
10
10 - 1