Disconnecting The Charger - Ranger Wheelchair Owner's Manual

Ranger Wheelchairs Owner's Manual
3. The front of the black control box that houses the joystick, speed dial and
on/off button has two outlets in it. Locate the plug that matches the plug on
the line from your charger.
4. Take the matching plug (coming from the charger) in one hand. Push the
plug in. It is now ready to charge.
5. Turn the charger switch to the ON position.
6. Be sure the on/off button is turned OFF when you are charging.
7. Leave the batteries charging for 10 to 14 hours. The charging meter will be
pointing to zero when the batteries are fully charged or a green light will glow.
8. If you use your wheelchair at all during the day, put it back on charge
when you stop using it. It is fully automatic, so will not overcharge, and your
wheelchair will be ready to give you full service the next time you use it.

Disconnecting the Charger

PLEASE, always follow this order of sequence:
1. Turn the power switch on the charger to the OFF position.
2. Unplug the charger from the wheelchair.
Points To Remember
1. NEVER connect or disconnect the battery charger while the switch is in the
on position.
2. ALWAYS turn the on/off button to the OFF position to charge.
Page 11